Operator Station High visibility operator station features an industry leading unobstructed view of tree bases and tree tops, throughout full articulation. The reverse-slope windshield prevents debris from collecting. More >> link

Structures Cat Wheel Feller Bunchers have proven, long-life tapered rollerbearing center joints. The engine house design is very durable and angled allowing debris to fall and not collect. More >> link

Serviceability Routine maintenance is quick and simple with ground level access, central lubrication banks and a standard tilting cab. Each side of the engine house is fully accessed by removing two screen doors on each side. More >> link

Engine
Gross Power	197 hp
Dimensions
Wheelbase	113 in
Weights
Operating Weight w/o Attachment	27275 lb
Dimensions
Overall Length	302.36 in
Hydraulic System
Cylinders - Steering	89 mm X 51 mm (3.5 in X 2.0 in)
Engine
Net Power	197.13 hp
Hydraulic System
Cylinders - Lift	102 mm X 64 mm (4.0 in X 2.5 in)
Cylinders - Tilt	102 mm X 64 mm (4.0 in X 2.5 in)
Disc Saw Pump Flow	26 gal/min
Hydrostatic Pump Flow	48 gal/min
Operating Specifications
Ground Clearance	21 in
Travel Speed - Low Range w/ 28L Tires	4.97 mph
Weights
Est. Operating Weight	27275.56 lb
Dimensions
Length w/ 22HC High Capacity Saw	302.36 in
Operating Specifications
Travel Speed - High Range w/ 28L Tires	14.91 mph
Dimensions
Length w/ 20HC High Capacity Saw	294.88 in
Engine
Rated Power	1800 hp
Dimensions
Width - Overall, 28L tires	116 in
Service Refill Capacities
Fuel Tank	72 gal
Engine
Engine Model	Cat® C7 ACERT™
Operating Specifications
Turning Radius (Outside Front Tires) - 28L tires	198.03 in
Dimensions
Ground Clearance	21 in
Height - Overall	125.98 in
Operating Specifications
Articulation Angle - Left/Right, w/ 28L Tires	90 Degrees

Standard Equipment
Electrical System
12-volt System with Circuit Breaker Protection and Master Disconnect
Tilt Over Operators’ Cab
13 Micron Absolute Rating Filtration
Main Return - 4.5 Micron Absolute Filtration
High visibility operators cab, reverse slope LEXAN windshield, eyebrow skylight, left side entry door, recessed door latch, sliding windows, right side emergency exit, high back operator’s seat, electronic gauges and warning lights, air conditioning/heating system digital AM/FM cassette stereo, horn, 10 lb. fire extinguisher, water tank hose storage, dual 12V power points
Structural
130 Amp Alternator
Heavy Duty Engine House
HA 2503 Front & Rear Axles
Auxiliary Hydraulics - 13 Micron Absolute Rating Filtration
Power Tilt Cab with Hand Pump
Drive Train
Wrap-around Bumpers/Pressurized Water Tank
Service brake-hydrostatic-dynamic braking, plus pedal operated, wet disc brakes on the front axle
Right Hand Joystick Lift and Tilt Control
Hydraulic System
Long-life Tapered Roller Bearing Center Joint
Parking brake-lever operated, cable actuated with caliper disc on drive line at transfer case
1/4 Turn “Quick Steer” with Steering Wheel, Foot Pedal Gathering Arm Control, Lap Belt
Operator Station and Controls
28 L x 26 14 PR Tires
Back-up Alarm

Optional Equipment
Flexxaire Reversing Fan
Lighting Package – 2 Forward, 2 Side, 2 Rear Facing, Mounted to Cab
Bolt-on Rear Canopy
HA 2513 Front (required for tire sizes over 67/34 x 25) Axles
30.5 x 32 16 PR Tires
67 x 34 x 25 14 PR Tires
Joystick Steering with Foot Pedal Gathering Arm Control, Four-point Seat Belt
Joystick Steering with Joystick Button Gathering Arm Control, Four-point Seat Belt

 

© 2010 Wheeler Machinery Co. All Rights Reserved | Legal Notices | Site Map | Privacy | Contact